Mark spencer
Member
hey guys where could i get a service manual for a 2004 chopper & the S&S motor
Simple search did point me here in less than it took me to write this...hey guys where could i get a service manual for a 2004 chopper & the S&S motor
The link was posted right above yoursDoes anybody knows how to get bigdog pittbull manual (2008)? Or software for it?
Thanks for the info Knotso very helpful!
Hey, check THIS out.Hey I found the link to the manuals
Sent from my iPhone using Tapatalk
Great find bro my bike should be here next week not sure if there’s one coming with it God blessSimple search did point me here in less than it took me to write this...
https://www.dropbox.com/sh/ng3saqa5a93gehp/AADK9gFSGaAG5oirsV17JO_Oa?dl=0
Sent from my iPad using Tapatalk
Hi Gas Man, I clicked on your flow chart PDF and it won't download. It says download failed. Could you post another copy of the flow chart? I did the same with my manual by putting all the tabs for all the different parts and sections. It sure does make things easier to find the section with all the tabs in it. Thanks a lot for the idea.Flow chart attached.
Thanks a lot for the manuals.
Well I had way too much crammed in that small BDM manual 3 ring. So I picked up a new slightly larger 3 D ring binder from the office shop. Put in the BDM manual , the S&S super G, S&S super sidewinder, and BDM troubleshooting flow chart. Designed a new cover, side cover and rear cover sheets. Turned out pretty good. Generic enough to pass around... well besides the side cover.
So here's what they look like.
Front Cover
Side Cover
Rear Cover
Its what's on the inside that counts...
BDM Manual
Little tabs for quick greasy hands flipping
Troubleshooting Diagnosis flow charts
S&S Super G
S&S Super Sidewinder
Plus more room for expansion, but not so big that its hard to move around and keep on the shelf. But a nice change over the tight squeeze I had in the factory binder. Plus I have been and predict alot more use of it with the current project.
I have a PDF file for the front and rear and can make about anything for anybody for the sides (just don't ask for cool artwork, but if you got it, I can use it), so just ask and I'll shoot them over to you.
Like to get a copy of the manuel.Well I had way too much crammed in that small BDM manual 3 ring. So I picked up a new slightly larger 3 D ring binder from the office shop. Put in the BDM manual , the S&S super G, S&S super sidewinder, and BDM troubleshooting flow chart. Designed a new cover, side cover and rear cover sheets. Turned out pretty good. Generic enough to pass around... well besides the side cover.
So here's what they look like.
Front Cover
Side Cover
Rear Cover
Its what's on the inside that counts...
BDM Manual
Little tabs for quick greasy hands flipping
Troubleshooting Diagnosis flow charts
S&S Super G
S&S Super Sidewinder
Plus more room for expansion, but not so big that its hard to move around and keep on the shelf. But a nice change over the tight squeeze I had in the factory binder. Plus I have been and predict alot more use of it with the current project.
I have a PDF file for the front and rear and can make about anything for anybody for the sides (just don't ask for cool artwork, but if you got it, I can use it), so just ask and I'll shoot them over to you.