05 Ridgeback Passenger Peg HELP

[busa03]

I have a 05 Ridgeback prod. # R51000. Just bought a Pass Peg Kit # BDM160-00245 with bracket #BDM160-00253 in it.
Tried mounting it with a set of hooker troublemakers and the right peg lays on the pipe. The bike has mounting holes of 2.5" center to center. I need an adaptor to pick up the bracket a bit.

Found a adaptor block but the mounting holes are off set at 3" and 3.5". That wont work. Any help would be great.

Thanks in Advance

 

[BikersDream]

Your problem is mounting the bracket on to the bike or your pegs are hitting the exhaust. We have adapter stands that raise the foot pegs so it don’t hit the pipe.

 

[BikersDream]

pegs, pegs and more pegs!

 

[pig pen]

I have seen a little adapter that is mounted to the wisker bar that will raise the peg up an inch or two.

 

[BikersDream]

I have seen a little adapter that is mounted to the wisker bar that will raise the peg up an inch or two.

Look up

 

[pig pen]

Look up

You beat me to it

 

[busa03]

Thanks for the info and pics. Hadnt seen those parts before. Will be in touch with you BikersDream