07 bulldog help

[Delwoody]

my 07 bull dog won't crank. Test show no power to starter. I ran a jumper wire to starter and it cranks with jumper but no start. The led light in the ehc laminates when I push the start button , so I know it's getting a signal from button. I'm suspecting the module took a crap.
I would like to test my theory. Does anyone have an old module laying around ? I have the efi 117 engine.

 

[Delwoody]

Bump

 

[BWG56]

Get a hold of Slick117, he can test your module for you

 

[Viking]

Good to see you in here Del. Can any of you old timers get him a manual. I'll do it when I get home, but he could use it before I get there.

 

[Viking]

After talking with him on the big dog biker group on eBay he seem rather competent and able to fix it himself, but he does need a manual. I'll send him one in a few days when I get home from work but was hoping someone could beat me to it so he can get his dog rolling again sooner.

 

[Delwoody]

I appreciate the help guys/gals. I did speak with Curtis. Manuals cost 170$
I'm thinking it's the module, however would like to confirm my dish with a manual. A schematic would be awesome.
Thanks to all who have lend a hand. I appreciate it. Kinda getting a bad taste in my mouth. This bike has been in and out of the shop for the last 2 months. Just got it this spring

 

[HMAN]

Try this Del...

http://www.bigdogbiker.com/threads/link-for-shop-service-manuals.74701/

 

[HMAN]

He's asking for a module.dies he need both. ?Curtis may have one for sale. I sold my EHC from my 07 Bulldog to member Geoffmt. might see if he wants to let it go. it was tested by Curtis before I

For some reason the links won't open for the service manuals anymore. I checked earlier today.

Huh? I checked them before I posted....weird.

Edit: I just downed the wiring diag, but its pdf so my phone wont share it.....the links seem to work to download but wont open to view

 

[bdm7250]

He's asking for a module.dies he need both. ?Curtis may have one for sale. I sold my EHC from my 07 Bulldog to member Geoffmt. might see if he wants to let it go. it was tested by Curtis before I

For some reason the links won't open for the service manuals anymore. I checked earlier today.

Link works for me.

 

[bdm7250]

Link works for me.

Try this.
https://www.dropbox.com/sh/ng3saqa5a93gehp/AADK9gFSGaAG5oirsV17JO_Oa?dl=0

 

[Viking]

Thanks Doug, I think this is just the ticket for him. Well, that and a little contact cleaner on his EHC.....

 

[Delwoody]

I have the 117efi engine

 

[Delwoody]

The schematics show a carburetor model

 

[Viking]

Your problem is the starter/ignition, right?

 

[TapioK]

Sent from my iPad using Tapatalk

 

[TapioK]

That ain't too good


Sent from my iPad using Tapatalk

 

[TapioK]

Sent from my iPad using Tapatalk

 

[Viking]

Del, Dougs link above will give you whatever schematic or manual you want. Here is the EFI schematic, hope that helps.

View attachment 36812

 

[Delwoody]

You all are awesome. From looking at the schematics I'm thinking the module is the cause

 

[Viking]

You all are awesome. From looking at the schematics I'm thinking the module is the cause

Like I said, a $2,- can of contact cleaner might be just the ticket. However, with the wiring diagram you should be able to pinpoint it. Let us know what you find, there is a solution to it.