Adjusting the throttle cable

surferdude

dry docked
Is there a way to adjust the throttle cable besides from under the grip? That adjustment is just bearly hanging on.
Is there some way to tighten the cable at the carb? Or is there an adjustment in the grip? :confused: :D :up:
 

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
Surf, if everything is together then there should be plenty of adjustment in the cables. Is it only one of the two cables?
If so then I would take the handle apart and see if on of the ferels fell off the throttle. If they get loose then have been known to pop out. This would give you too much slack and cause what you are discribing. Just be carefull putting it back together. There is a magnet in there for the front brake and you want to be careful not to pinch the brake wire in there. An extra pair of hands helps with this.

:cheers:
 

RRRUFF

Well-Known Member
What Ray said. Happened to a friend here, got it from the dealer that and the ferrell feel out. Got new ferrell put it all back together, good to go.
 
Top