BDM oil cooler fittings

[semi]

Bought a BDM oil cooler from Full House cycle, came with the cooler, clamp, 2 lines and 2 fittings that screw into the bottom of the cooler. My shop says Im missing a fiitting, a union to connect line to line ?? Full House cant give me the correct answer so does anyone that has bought a cooler know if there are 3 fittings that are suppose to come with the kit? If so, what size union do I need and where the hell would I find one ? Perhaps a local speed shop ? Thanks for the help

 

[Eric]

yes it does come with a 3rd fitting,, I think thay call it a bulk head fitting or flare union.. not sure the size .. but it will match the line the cooler come with.. use the line & or fitting & match up the size .. it should have a male fitting on each end..

 

[semi]

Thanks Eric !

 

[chacha]

Didn't have nor need a 3rd fitting with mine -- but it was an 04. Cooler connected to the existing fittings and replaced 2 of the lines.

"Your mileage may vary....."

 

[BADOG]

HAD AN '05 CHOPPER, DIDN'T NEED THIRD FITTING, TRANSFERRED THE ENTIRE OIL COOLER AND STASH TUBE TO MY 2007 CHOPPER WHEN I GOT IT, AND DID'T NEED IT ON THAT EITHER, BUT IF YOU STILL HAVE QUESTIONS I'D CALL BIG DOG DIRECTLY @ 316-267-9121.