Hubs on 06 RB

Energy One
phatchopper300

phatchopper300

I just wanta ride
OK this is one of the questions that sounds stupid but I need to know. I am replacing my back tire. I removed wheel and all hubs replaced bearings and polished everything. I have noticed on the forum it has been said to mark the hubs to put back in the same position. Well I didn't mark( I know what a dumb ass) hubs. What can happed will the wheel be unbalanced? I have placed hubs on the correct side not just in the exact same spot. :confused:
 
Last edited:
Raywood

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
No problem. Put them back together and you'll be fine. On mine though there is a dot on the wheel and the hubs that I match up.
 
Raywood

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
phatchopper300 said:
Thanks Ray. Yea I had no dots on mine. But boy do they shine now!!:D Hope your travels are going well be safe!
Click to expand...
Get that thing back together and ride down here. Or I'll meet you half way. Drinks on me
:cheers:
 
Raywood

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
phatchopper300 said:
Should there be any slide play on the spacer the long one in between the hubs and the outer bearings
Click to expand...
Mine is tight and I have to insert the axle when I lock down the hugs to ensure it's centered correctly
 
MARV

MARV

Well-Known Member
close to zero play but definitely not tight either.

its a critical part

make sure the bearings are fully seated
 
phatchopper300

phatchopper300

I just wanta ride
MARV said:
close to zero play but definitely not tight either.

its a critical part

make sure the bearings are fully seated
Click to expand...
Thanks Marv- I had slight play on the inner long spacer. Got it corrected now. What kind of grease would you recommend on the axel.
 
You must log in or register to reply here.
Top