MuscleBiker
Member
Installed a Wire-Plus Harness in my '07 K9. Everything works just fine, except when I attempt start-up, the starter ground cable connection sparks, and finally melted at the grounding bolt cable end. Starter engages and turns engine over. I have triple-checked my wiring. No fuses blow. Anyone have any ideas as to why this is happening?
Thanks for the tips. Problem ended up being a defective end (loose connection) on my main ground cable from the battery neg. to the upper mounting bolt of the starter solenoid housing. Replaced the cable, went to a new ground, everything works great. Just a lot of chasing my tail. Hope this helps someone else.
Thanks for the tips. Problem ended up being a defective end (loose connection) on my main ground cable from the battery neg. to the upper mounting bolt of the starter solenoid housing. Replaced the cable, went to a new ground, everything works great. Just a lot of chasing my tail. Hope this helps someone else.
Last edited:
