Transmission advise

[Lanakila]

Aloha Big Dog Nation!!! I am a new member for several months now. I own a 2007 Mastiff. I just changed my main shaft bearing and counter shaft bearings in my tenant just the other day. I bought a rebuild kit and also changed what ever needle bearings I could without pulling the pressed gears. Everything worked out great. Unfortunately 2 C clips failed and caused the 4th gear to slip off of bearings. Long story short is, Im asking for your help! I am looking for a tranny or tranny parts. The counter shaft gear for 4th on main shaft is not good and 4th gear too. Any help will be appreciated!!! Mahalo!!!!
Lanakila

Attachments

• 
  6C7C696B-C04F-4C75-BD4A-C90B07D70A59.jpeg
  244.3 KBViews: 15
• 
  47B9ECB7-843C-49FB-BFAB-EAF72667F2E2.jpeg
  188.7 KBViews: 15
• 
  739076B0-A8AB-4496-A399-C5F31A6E10C1.jpeg
  193.8 KBViews: 15
• 
  ECE80A5C-2B26-4591-8D4E-5010A1130072.jpeg
  183.4 KBViews: 18
• 

 

[Lanakila]

I was told maybe Ulitima transmission RSD might be a good pick for the $$$? Would it be a direct bolt on? Any help would be appreciated. . Slim pickings in Hawaii! Lol

 

[knothead]

 

[Mickmorris]

I was told maybe Ulitima transmission RSD might be a good pick for the $$$? Would it be a direct bolt on? Any help would be appreciated. . Slim pickings in Hawaii! Lol

Knothead has laid it out for you. Big $$$ to do that conversion. Can be done but costly operation. Seriously you can get the gears you are needing & stick with the Baker. If you send the transmission to Andy Barnes I am pretty sure he can bulletproof it. Just a thought. Either way your shit is jacked up until you get it fixed right...

 

[Lanakila]

Thanks for the advise guys!!! Got it all taken cared of!!! Mahalo Rob!!!!