ranger2001
New Member
My very first 07 fuel injected Bull dog. It always starts but smells very gassy, almost like its flooding. Any idea's what might be causing this? Have new plugs, new twisted 10mm wires.
Have you tried to reset the VFI ?... So to reset you VFI follow these instructions.
Turn the key switch on then hit the run button on the handle bars but DO NOT START the bike. Let it set that way and dont touch nothing for about 10 seconds.... then turn the key switch off and wait 1 full minute before turning the key switch back on.... Once it has set for 1 minute with the key switch off then turn the key switch on and hit the run button and then start the bike....sometimes you have to do the steps above a few times for this to work.
Another thing is if your battery is a little weak and not super hot efi bike will also do what you are describing...these efi bikes are more sensitive to a lower voltage...hot battery always with the bikes and keep them on a battery tender...efi bikes will have a small voltage drain on them I have noticed compared to carb bikes
My fuely 9 started exhibiting same.....as you were in the vicinity of the fuel line connection at engine I'd check there. That hose clamp sees a weird angle and can nick that line without spewing fuel.....I just nipped off the last 1/2" and reattached.....My very first 07 fuel injected Bull dog. It always starts but smells very gassy, almost like its flooding. Any idea's what might be causing this? Have new plugs, new twisted 10mm wires.