Run - Run - Start....... Run-Run-Start......

[SuperNova]

It usually takes me 3 to 5 times of doing the Run, Run, Start before it finally turns over and starts. The first few times it just doesnt make a peep. So Im trying to trouble shoot what might be happening. Definitely not my Starter as that works fine. Possible Right Hand Control PCB buttons going bad? My ECM finally taking a poop? It is very intermittent. Sometimes it will start right up on the first one, but for the most part 3 to 5 times. Oh and yes I keep the battery fully charged on a tender all the time.
Would like to hear your guys thoughts! Thank you.

 

[joshchevy]

It usually takes me 3 to 5 times of doing the Run, Run, Start before it finally turns over and starts. The first few times it just doesnt make a peep. So Im trying to trouble shoot what might be happening. Definitely not my Starter as that works fine. Possible Right Hand Control PCB buttons going bad? My ECM finally taking a poop? It is very intermittent. Sometimes it will start right up on the first one, but for the most part 3 to 5 times.
Would like to hear your guys thoughts! Thank you.

Just had the exact issue with mine. Then few more issues. Could be the small control board for the buttons or the EHC starting to give. I am currently waiting for Curtis over at WSW to give me word on my EHC. They test them over at his shop and have what you need to correct the issue.

 

[SCC007]

Take a look at the control board first, might be as simple as a little cleaning. If needed they have upgrades for them but still cheaper and a good starting point before the EHC.
Agree that Curtis is the man when it comes time for EHC diagnosis or replacement.