Jeff Taylor
Member
My headlight just went out I'm hoping it's just a bulb I can't get the ring off to check it the set screws on the bottom are junk
Headlight
- Thread starter Jeff Taylor
- Start date
Mr. Wright
Knows some things
Use a small LH drill bit to drill them out. If you can't find one give me a call.
Jeff Taylor
Member
Ok thanks I'll try that after work
Chuck Hughes
Member
So what do ya do with a headlight with no set screws. Mine just has a slot at the bottom, probably an inch wide.
Sounds like an adjure bucket with the phastlock system. There should be a Nylon white rope in that slit you pull out. Grab a set of needle nose
Sent from my SM-G925P using Tapatalk
Chuck Hughes
Member
Ahh!! That's what that is! Thank you!
Chuck Hughes
Member
My bulb is fine, it's just crooked, and driving me a little nuts.
Okay then don't pull that rope out all the way! See if you can just back it out enough to where the light will move
Sent from my SM-G925P using Tapatalk
Dusty.B
Member
Those headlight rings are tricky sometimes, once you pull it out make sure everything is nice and clean and a little wd40 on the white ring & life will be a lot easier when it comes to putting it back in place. Oh and patience lol don't force her. I dread taking the ring out of mine. Its ridiculous how tight the fit is.
pauldeepsea
Guru
Try some double sided adhesive tape around the bulb where it contacts the bucket. That's what I did on my adjure to hold the bulb in place
pauldeepsea
Guru
The adjure doesn't screw in like a standard light. One of the reasons I love their lights.
Never had any issue with mine, takes about 10 minutes to R&R headlight. Also headlight stays straight without any adhesive to keep it in place. The Tejas has a set screw and what a pain in the ass it is, small set screw recessed up inside a larger hole, plus I can't see shit that small...even with my glasses.
cdogg556
Guru
I don't even use the alan head set screws anymore since they stripped out, just use the one for the bezel and I treaded a bigger screw in it with a phillips head on it, still an pain in the ass to get it out, when I can I am gonna get rid of it and go with something like the wolf headlight.
liferider
Looking forward to retirement
Put a day maker in and don't worry about it
Chuck Hughes
Member
IF they weren't so damn expensive!
BWG56
Guru
So you were sneaking in some looks were ya?I didn't care for the wolf light until I saw it up close on Ker's bike. It's pretty damn sharp
Chuck Hughes
Member
Looks damn close to the headlight I have on my sporty
BWG56
Guru
View attachment 47406
Yeah, I took a quick look. I was thinking, "it must be the injectors, no, maybe its the throttle body needs a cleaning, no maybe if I hit the run button
I was trying to explain to him how the bike works, even though he has one just like it, after the 3rd time, I was starting to get a migraine. I kept telling him the key is on the other side, not the side he's pointing to
Holy shit, I'm almost a marble head myself
TapioK
Well-Known Member
$50 is damn expensive?